Monet DeSauw

• ESC (Enhanced Servo Controlled) 5 Blade Automated Component Saw
• Touch Screen User Interface with Backup Mechanical Controls
• 3 Operating Modes: Auto (via Download), Semi-Auto (Touch Screen Entry) & Manual (Push Button)
• Variable Speed Conveyor (0-60 Boards per Minute) with Powered Hold Downs
• (1) 30" x 80 Tooth Blade (27 3/4" Scarf on PAE)
• (4) 16" x 40 Tooth Blades (13 1/2" Scarf on Centerline)
• Pneumatic Blade Brakes on all 5 Blades
• 16 1/2" to 20' Length Capacity (11" Minimum on Square End Blocks)
• Waste Conveyor (under saw)
• Incline Waste Conveyor (adjacent to saw)
• 480 Volt / 3 Phase

• Monet DeSauw Cut-Off/Shaper Unit
• Rook Metering Equipment Glue Machine ($22,900 New in 2021)
• Monet DeSauw Finger Joint Press
• Excludes Dust Collection System

• Automated (Wall Panel Software Download) or Semi-Automated (Touch Screen Entry) Operation
• Comprehensive Set-up Screens
• All Movements are Computer & PLC Controlled
• Servo Controlled Pusher for Accurate Lengths
• Up Cut Saw with 22" Blade
• Cut & Mark 2 Boards from 2x4 to 2x12 up to 20' in Length
• Ink Jet Printing (on the edge) - optional face printing is available
• Lumber Optimization (using software generated pick list & sawyer defined "fill" boards)
• Outfeed Que Table
• 480 Volt / 3 Phase - 40 Amp
• 27 CFM at 100 PSI
• Add $7,000 for Installation (3 Days Onsite)
• Add $650 for Spare Blade
• Add $28,500 for Optional 20' x 16' Auto Live Deck with Double Stack Feature

• Touch Screen User Interface with Backup Mechanical Controls
• 3 Operating Modes: Auto, Semi-Auto & Manual
• All 20 Axes of Movements are Computer & PLC Controlled
• Average Set-Up is 6-8 Seconds
• Comprehensive Setup Screens Display Each Piece with Setup Data
• Anti-Collision & Optimizing Programming
• Auto Calibration
• Productivity & Time Tracking
• Maintenance Diagnostics
• Variable Speed Conveyor (0-60 Boards per Minute) with Powered Hold Downs
• (1) 30" x 80 Tooth Blade (27 3/4" Scarf on PAE)
• (4) 16" x 40 Tooth Blades (13 1/2" Scarf on Centerline)
• Pneumatic Blade Brakes on all 5 Blades
• 16 1/2" to 20' Length Capacity (11" Minimum on Square End Blocks)
• Belt Waste Conveyor Under Saw
• 480 Volt / 3 Phase
• Includes 4 Day Onsite Installation & Training
• Add $3,100 for Extra Set of Blades
• Add $4,300 for Incline Belt Waste Conveyor
• Add $28,000 for Ink Jet Printer
• Add $3,200 for Catcher Display
• Add for Optional Live Deck and Label Printer
• Add $40,000 for Servo Controlled Saw

• Heavy Duty 5 or 6 Chain Lumber Feed System (Compatible with Most Component Saws)
• 16' Wide x 20' Long x 36"(+or-4") High
• 12 Adjustable Legs with Swiveling Feet
• Sumitomo 3 HP Gear Motor with Cycloidal Reducer (97% Overall Efficiency)
• Auto Feed Control
• Foot Pedal Override (Forward & Reverse)
• Variable Speed Control
• Sort Start & Soft Stop Controls
• Safety Shutoff Cable at Perimeter & Emergency Stop at Control Panel for Safety
• 5 Chain Model Transfers 6' to 20' Lumber (20,000 Lb Capacity) - $28,500
• 6 Chain Model Transfers 3' to 20' Lumber (25,000 Lb Capacity) - $29,500
• Heavy Duty Double Bearing Construction
• Lumber Stop on Both Ends
• Optional Side Tables & Popup Tables

• Automated (Truss Design Software Download) or Semi-Automated (Touch Screen Entry) Operation
• All Movements are Computer & PLC Controlled
• Comprehensive Setup Screens Display Each Piece with Setup Data
• 22" x 40 Tooth Blade on PAE
• Cut 1 or 2 Boards up to 20' (2 Second Plunge Cut)
• 4" Minimum (w/4 Angles), 1/2" Minimum (Blocks)
• Cut Chords, Webs, Rafters, Wedges & Stair Stringers
• Cut Long Scarfs by Multi-Plunging
• Small Piece Retrieval
• Outfeed Que Table
• Servo Positioning on Infeed, Angle & Outfeed Pusher
• Over Travel Protection
• Ink Jet Printer (prints on 1 1/2" edge - add option available for face printing)
• Lumber Optimization Program
• Belt Waste Conveyor
• 480 Volt / 3 Phase / 60 Amp
• Includes 5 Day Onsite Installation & Training
• Add $650 for Spare Blade
• Add $4,500 for 12' Incline Waste Conveyor
• Add $29,900 Optional 20' x 16' Auto Live Deck with Double Stack Feature
  
  EQUIPMENT FINANCING available from Fidelity Leasing

FRAMING TABLE
Lengths to 16' (additional length available in 4' increments)
Powered Height Adjustment (6-11' to 12'-5" wall heights)
Pop-up Skatewheel Conveyor
Fixed Squaring Stops
Excludes Tool Dollies

MONET DESAUW PANEL BRIDGE
Programmable Fastener Patterns with PLC Touch Pad Entry
Bridge Auto Return
Bridge Tilt at Sheathing Seams
Photo Eyes Locate Edge of Wall & Openings
Laser Pointer

One 110 Volt / 20 Amp Connection Required

OPTIONS
Add $6,600 for Stud Locators at 16" & 24" O.C.
Add $3,000 for Handle Bar Router
Add $1,950 for Wall Panel Lift (Excluding Hoist)
Add $3,500 for 1 Pair of 15' Skatewheel Conveyor with Stands
Add $13,900 for Sub-Component Layup Tables with Pop-up Skatewheel Conveyors

Includes Installation Support in the United States & Canada
EQUIPMENT FINANCING available from Fidelity Leasing

SQUARING TABLE
Lengths to 16' (additional length available in 4' increments)
Powered Height Adjustment (6'-11" to 12'-5" wall heights)
Roller Conveyor & Squaring Stops

MONET DESAUW PANEL BRIDGE
Programmable Fastener Patterns with PLC Touch Pad Entry
Bridge Auto Return
Bridge Tilt at Sheathing Seams
Photo Eyes Locate Edge of Wall & Openings
Laser Pointer

OPTIONS
Add $3,000 for Handle Bar Router
Add $1,950 for Wall Panel Lift (Excluding Hoist)
Add $3,500 for 1 Pair of 15' Skatewheel Conveyor with Stands
Add $13,900 for Sub-Component Layup Tables with Pop-up Skatewheel Conveyors

Includes Installation Support in the United States & Canada
EQUIPMENT FINANCING available from Fidelity Leasing

• Push Button Powered Blade Angulations
• Single Push Button Setting for 2 Blades per Side
• Electronic Digital Readouts
• Backup Mechanical Scales
• Cuts 4 Angle Webs, Cantilever Webs (2 piece webs) & Square Blocks
• Square End Cutting of Truss & Wall Panel Components
• Magazine Lumber Feed for 3x2, 4x2 and 6x2 Lumber
• Heavy Duty Feed Conveyor with Hold Downs
• 12 1/2" to 54" Length Capacity (7" Minimum on Square Blocks)
• 60 Pieces per Minute
• (4) Internal 16" Blades & (1) External 16" Cut-Off Blade
• Pneumatic Blade Brake on External Blade
• Belt Waste Conveyor (under saw)
• Dust Hoods
• Add $4,300 for 12' Incline Waste Conveyor (adjacent to saw)
• Add $2,100 for Extra Set of Blades
• Add $1,250 per Foot for Length Capacity greater than 4'
• Add $4,750 for Installation (1 day onsite) 
• 480 Volt / 3 Phase / 60 Amp
  
  EQUIPMENT FINANCING available from Fidelity Leasing